LED Stop & Go Traffic Lights

Our advanced-technology LED Stop & Go traffic lights are ideal for managing traffic at loading docks & bays, gates, parking garages, weigh scales, toll booths, and similar locations where reliable traffic control is required.

Red/Green Lights, 12-24Vac/dc, Yellow Body

Part Number: TL96-LV-YL

Installation type: Flush mount
Light source type: LED
Voltage: 12-24Vac/dc
Amperage: 75mA @ 24V, 150mA @ 12V
Lens diameter: ~4"
Assembled dimensions: 10” H x 5” W x 3” D
Item weight: 1.45 pounds

Red/Green Lights, 12-24Vac/dc, Black Body

Part Number: TL96-LV-BK

Installation type: Flush mount
Light source type: LED
Voltage: 12-24Vac/dc
Amperage: 75mA @ 24V, 150mA @ 12V
Lens diameter: ~4"
Assembled dimensions: 10” H x 5” W x 3” D
Item weight: 1.45 pounds

Red/Green Lights, 110-130Vac, Yellow Body

Part Number: TL96-HV-YL

Installation type: Flush mount
Light source type: LED
Voltage: 110-130Vac
Amperage: 30mA
Frequency: 60Hz
Lens diameter: ~4"
Assembled dimensions: 10” H x 5” W x 3” D
Item weight: 1.45 pounds

Red/Green Lights, 110-130Vac, Black Body

Part Number: TL96-HV-BK

Installation type: Flush mount
Light source type: LED
Voltage: 110-130Vac
Amperage: 30mA
Frequency: 60Hz
Lens diameter: ~4"
Assembled dimensions: 10” H x 5” W x 3” D
Item weight: 1.45 pounds

Slim Red/Green Lights, 12-24Vac/dc

Part Number: TL24-LV

Installation type: Flush mount
Light source type: LED
Voltage: 12-24Vac/dc
Amperage: 75mA @ 24V, 150mA @ 12V
Assembled dimensions: 24 3/8” H x 1 1/2” W x 1” D
Item weight: 1.45 pounds

Features

Reliable Brightness

The brightest available. They boast ultra-bright high-efficiency LEDs that are amplified by optical LED lenses. These lights can be seen in all conditions, including direct sunlight.

Long Lifespan

Low-voltage units, with a wide input range of 12-24Vac/dc, feature on-board power supplies. They generate consistent brightness and are not affected by fluctuating supply voltages. The 110-130Vac models feature supplementary protection. This includes a resettable fuse that safeguards them from voltage surges that diminish the lifespan of LED Stop & Go Lights by other manufacturers.

Weather-Resistant

Made with housing materials designed to withstand all weather conditions. This includes extended sun or rain exposure. The TL96 models are completely gasketed and waterproof. The TL24 model has a board coated in a waterproof polymer.

Low Profile

Designed to mount discretely to the wall for avoidance of accidental impact. The TL96 are only 3″ deep, while the TL24 models extend just over 1″ from the wall. The narrow profile of the TL24 can also fit into the tightest of spaces.